0.65KW 8500r/min Weed Eater Gas Powered Weed Whacker,26CC 2 Blade Heads,Air-Cooled 2-Stroke Cordless Lawn Edger Gas Weed Trimmer with Handle & Shoulder Strap for Garden Lawn Grass Hedge Trimmer

Application: This product is mainly used for home lawn mowing, orchard mowing, tea garden mowing, cutting rice and wheat, cutting corn stalks, reed harvesting, pond side weed removal, bushes cutting, etc., and mostly used in agriculture, forestry, landscaping, and urban greening. Specification: Color: Red, Silver Material: PP, Aluminum Alloy, Manganese Steel, Nylon Assembly Required: Yes Usage: Side-mounted Displacement: 26CC Power: 0.65kw Rotation Speed: 8500r/min Engine Type: Single-cylinder Air-cooled 2-stroke Gasoline Engine Carburetor Type: Diaphragm Carburetor Gasoline Oil Mixing Ratio: 20-25:1 Idling Speed: 2800-3200r/min Fuel Tank Volume: 1000ml /33.8 Oz Operating Noise: About 110db Engine Size: 26*22*27cm/10.24*8.66*10.63in Product Length: 1.75m/5.74ft Gross Weight: 8.5kg/18.74 lbs Package Size:105*25*25 cm/41.34*9.84*9.84 in Package Included: 1 * Weed Wacker 1 * Oil Pot 1 Pair* Goggles 1 * Funnel 1 * Carrying Strap 1 * English Manual Starting Method: 1. Fill the fuel tank with well-proportioned fuel. (Mixing ratio: 1:20-25 for FB/FC grade engine oil, 1:40-50 for FD grade engine oil) 2. Press the fuel bubble under the carburetor until the fuel bubble is full of fuel. 3. Turn the off switch to the “I” position. 4. Pull the starter rope. 5. When there is a starting response, close the damper and pull the starter rope again. 6. After starting, open the damper. 7. Cycle to accelerate the warm-up machine work. 8. For the first 10 hours of use, the oil mixture ratio should be a little thicker, then follow the normal ratio. Work Check: Please check daily if the oil is sufficient, visually at the threaded port position, and add appropriately if it is missing. Please check daily whether the air filter is too dirty. Please use pure gasoline to clean the air filter sponge. Please check whether the throttle cable is stable in the carburetor position before work. Please check whether the blade is in good condition before work, and do not use a damaged blade. Before working, please check whether the grass baffle is in good condition, and replace the cracked and damaged grass baffle. Please check whether the screws in each part are loose, and check and tighten them one by one with a wrench. Please read the operating manual completely before use. And pay particular attention to the safety instructions included.